Needle Type Durometers Shore Hardness Tester Shore a 0-100ha

Shore rubber hardness tester is the measurement of vulcanized rubber and plastic products hardness tester instrument, the instrument has A type, D type, O type three forms.Type A and type D are respectively suitable for testing the hardness of low and medium hardness rubber materials and high hardness rubber materials.Test for hardness of microporous materials for shoes made of rubber and plastic containing foaming agent.

twoMain parameters:

1. Dials value: Type A: 0-100HA, Type D: 0-100HD, Type O: 0-100HW

2. Needle stroke: 0-2.5mm
3.Net Weight:209g

3.Usage:

Place the sample on a firm plane, hold the durometer, press the pin on the sample smoothly at least 12mm from the edge of the sample, press the needle vertically into the sample, and even the reading within 1S when the pressure foot is in complete contact with the sample.The hardness values were measured 5 times at different locations where the measuring points were at least 6mm apart, and the average values were taken (measuring points of microporous materials were at least 15mm apart).In order to stabilize the measurement conditions and improve the measurement accuracy, the hardness tester device should be measured on the same type measurement rack in the supporting production place.

Type 0 is suitable for the microporous material which is made of foaming agent in plastic

Type A is suitable for general rubber, synthetic rubber, soft rubber, polylipids, leather, wax, etc

Type 0 is suitable for the microporous material which is made of foaming agent in plastic

Type D is suitable for general hard rubber, resin, acrylic, glass, thermoplastic rubber, printing plate, fiber, etc.